There are two types of walkie-talkie frequency: computer frequency modulation and manual frequency modulation. For computer FM, use a dedicated cable to connect to the computer, and use dedicated software to rewrite the frequency you need.
Manual FM is the digital button on the panel of the walkie-talkie, you can write the frequency you need by directly inputting the number. However, the walkie-talkie of different brands and models can be adjusted
The frequency method and steps are also different. It can be operated according to specific brands and models.
Common ways to link the two-way radio:
- The host completes the programming setting.
- In frequency mode, adjust the host and slave to any one of the same frequency (displayed on LCD.), such as: 410.000 or 450.000 and then shut down. 3. Ann
Press and hold the “LOW” key of the main unit to turn it on, and the LCD will display the “CLONE” character.
use - Press and hold the “LOW” key of the handset to turn it on, the LCD will display the character “CLONE”.
- Press and hold the “PTT” button of the main unit to start copying. When the slave unit receives the copy signal, the signal strength display in the LCD will all light up.
- After the copy is completed, it will return to the frequency setting mode. The “CLONE” character on the LCD. disappears. If the host has displayed that the copy is complete and the LCD of the slave remains
The “CLONE” character indicates that the copy was not successful. Need to copy again.
Handheld Radio
Handheld Walkie Talkie Portable Two Way Radio